導軌和絲桿的安裝是確保機械系統精確性和穩定性的關鍵步驟。以下是導軌和絲桿安裝的簡要指南：

　　The installation of guide rails and screws is a key step in ensuring the accuracy and stability of mechanical systems. The following is a brief guide for installing guide rails and screws:

　　導軌安裝

　　DIN-Rail Mounting

　　準備工作

　　preparation

　　確定安裝位置，并進行必要的測量和標記。

　　Determine the installation location and conduct necessary measurements and markings.

　　準備安裝工具，如扳手、螺絲刀、水平儀等。

　　Prepare installation tools such as wrenches, screwdrivers, level gauges, etc.

　　安裝導軌本體

　　Install the guide rail body

　　將導軌放置在安裝表面上，確保其與安裝表面平行。

　　Place the guide rail on the installation surface, ensuring it is parallel to the installation surface.

　　使用螺絲或固定夾將導軌固定在基座或機架上。

　　Use screws or clamps to secure the guide rail to the base or frame.

　　使用水平儀檢查導軌的水平度，確保安裝水平且垂直于所需的線性運動方向。

　　Use a spirit level to check the levelness of the guide rail, ensuring that it is installed horizontally and perpendicular to the desired linear motion direction.

　　安裝滑塊

　　Install slider

　　將滑塊放置在導軌上，并通過滑塊上的調節螺釘或固定螺釘將其固定在導軌上。

　　Place the slider on the guide rail and secure it to the guide rail using the adjustment screw or fixing screw on the slider.

　　調整滑塊，確保平穩的線性運動。

　　Adjust the slider to ensure smooth linear motion.

　　測試和調整

　　Testing and adjustment

　　手動或通過控制系統機械系統，測試導軌的線性運動性能。

　　Activate the mechanical system manually or through the control system to test the linear motion performance of the guide rail.

　　根據測試結果，對滑塊、導軌或其他相關部件進行必要的調整和校正。

　　According to the test results, make necessary adjustments and corrections to the slider, guide rail, or other related components.

　　固定和清潔

　　Fixing and Cleaning

　　使用螺絲刀將導軌和滑塊上的螺絲進行一次的固定。

　　Use a screwdriver to fix the screws on the guide rail and slider for the last time.

　　清潔導軌和滑塊表面，去除塵土和雜質。

　　Clean the surface of the guide rail and slider to remove dust and impurities.

　　絲桿安裝

　　Screw installation

　　準備工作

　　preparation

　　檢查絲桿副的型號、規格和精度等級是否符合機床要求。

　　Check whether the model, specifications, and accuracy level of the screw pair meet the requirements of the machine tool.

　　準備安裝工具，如扳手、螺絲刀等。

　　Prepare installation tools such as wrenches, screwdrivers, etc.

　　安裝絲桿副

　　Install the screw pair

　　將絲桿傳入電機座和軸承座中。

　　Insert the screw into the motor seat and bearing seat.

　　安裝單列深溝球軸承，并用彈性擋圈固定。

　　Install a single row deep groove ball bearing and secure it with an elastic retaining ring.

　　安裝螺母到絲杠上，起到固定套的作用。

　　Install the nut onto the screw to serve as a fixing sleeve.

　　調整和測試

　　Adjustment and testing

　　檢驗絲桿徑向跳動，確保在要求值以下。

　　Check the radial runout of the screw rod to ensure it is below the required value.

　　安裝絲桿副的驅動裝置，并確保同軸度。

　　Install the driving device for the screw pair and ensure coaxiality.

　　連接驅動裝置與絲桿副的傳動件，如聯軸器、傳動帶等。

　　Connect the driving device to the transmission components of the screw pair, such as couplings, drive belts, etc.

　　測試和調整

　　Testing and adjustment

　　手動或通過控制系統機械系統，測試絲桿的線性運動性能。

　　Activate the mechanical system manually or through the control system to test the linear motion performance of the lead screw.

　　根據測試結果，對絲桿副進行必要的調整和校正。

　　According to the test results, make necessary adjustments and corrections to the screw pair.

　　固定和清潔

　　Fixing and Cleaning

　　使用專用工具將絲桿副緊固在機床上。

　　Use specialized tools to fasten the screw pair onto the machine tool.

　　清潔絲桿和傳動件表面，去除塵土和雜質。

　　Clean the surface of the screw and transmission components to remove dust and impurities.

　　安裝導軌和絲桿時，要特別注意平行度、垂直度和對中性，以確保系統的平穩運行和精確性。安裝完成后，應進行充分的測試和調整，確保導軌和絲桿副正常工作。

　　When installing guide rails and screws, special attention should be paid to parallelism, perpendicularity, and alignment to ensure the smooth operation and accuracy of the system. After installation, sufficient testing and adjustment should be carried out to ensure the normal operation of the guide rail and screw pair.

　　本文由 導軌絲杠 友情奉獻.更多有關的知識請點擊 http://m.kezhirui.com  真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the guide screw For more related knowledge, please click http://m.kezhirui.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.